Designed by Bethany Dailey
Now that the holidays have passed and all the rush and hurry is behind us, it’s time to work up a stitch on our looms that doesn’t take too much thinking or tricky finger-work to accomplish. This stitch pattern is just the ticket! It is a simple 8 row repeat and once you get the hang of them, they can be worked entirely from memory. The long alternating dashes resemble a nice rustic weave, and results in a fairly thick and sturdy panel. It would be a perfect stitch for a cowl or scarf, or even an entire blanket!
In this monthly column we’re going to be working on some exciting new stitch patterns, as well as a few new techniques thrown in for good measure. My intention for our yarn play is to provide all the know-how for you to be able to work the new stitch; any charts, photos, or videos you may need; as well as a pattern to create an 8” x 8” square. As we go along in our looming journey, we should be able to create lovely pieced afghans with our squares, as I like to know that we’re going somewhere while swatching, don’t you? You can think of it as our Stitch Sample Afghan—a stitch dictionary right at your fingertips, keeping your legs warm, lol. ;) To find all the previous stitches in this column, simply click here.
Triple Slip Rib Square
Items Needed
Loom: Authentic Knitting Board Adjustable Hat Loom: 2 rounded pieces + 3 peg connectors, with pegs in all holes for a 3/8” gauge. The Sock Loom 2 or the All-n-One Loom could also be used.
Yarn: approx. 75 yards Worsted Weight (Sample uses Berroco Vintage in mochi)
Notions: Loom tool, yarn needle, scissors. (Also helpful: peg markers, row counter, and blocking pins)
Pattern Notes:
To work this pattern in the round, such as for a hat, use the Repeating Pattern Rows chart, and make sure to read it from right to left for each row, rather than alternating sides each time. Also, cast onto your loom in a clockwise direction, using a number of pegs that is divisible by 6—the number of stitches required for each pattern repeat.
For flat pieces of a greater size, simply increase the number of Repeating Pattern Rows inside the garter stitch edges for the length and width required, then complete with the Finishing Rows. The border edges may need to also be increased to coordinate with the number of increased Repeating Pattern Rows.
When the pattern uses the term “knit” or “k”, please use the true knit stitch or the u-stitch, not the e-wrap.
A SWYF in the pattern denotes that this peg will not be worked, but will have the working yarn (WY) carried to the front of the work. To do this, simply remove the loop already on the peg, slip the WY in front of the work and behind the peg, then replace the held loop back onto the peg. This stitch pattern will do this in groups of three stitches at a time.
*Note: another easy way to work a SWYF is to begin to work a purl stitch, but instead of lifting the original loop off the peg and placing the new loop on the peg as you do when purling, simply KO the new loop, leaving the original one in place. Pull gently to free the WY, which will now be between the peg and the front of the work.
Repeating Pattern Rows
Here are the Repeating Pattern Rows for the stitch itself, based on the chart above:
Rows 1 & 2: p1, k1, p2, k1, p1.
Row 3: SWYF-3, p1, k1, p1.
Row 4: p1, k1, p1, WYIF-3.
Rows 5 & 6: repeat Row 1.
Row 7: repeat Row 4.
Row 8: repeat Row 3.
Here is the entire pattern chart for the 8” x 8” square:
Everything you need to know about knitting your square is included in the above chart. Believe it or not, you can actually create your square without looking at another thing! For help with reading charts, please see the Stitchology I post for a detailed explanation, and you’ll be ready to go!
But, don’t worry…I am also providing you with the step by step instructions below. ;)
Step by Step Instructions:
Cast onto your loom from left to right, using a total of 39 pegs. (Sample uses Chain Cast On)
Set Up Rows
Row 1: p39.
Row 2: k39.
Row 3: p39.
Row 4: k39.
Main Pattern Rows
Row 5: p2, *p2, k1, repeat form * to last 4 sts, p4.
Row 6: k2, *p2, k1, repeat from * to last st, k1.
Row 7: p3, *SWYF-3, p1, k1, p1, repeat from * to last 6 sts, SWYF-3, p3.
Row 8: k2, p1, *SWYF-3, p1, k1, p1, repeat from * to last 6 sts, SWYF-3, p1, k2.
Row 9 & 10: repeat Rows 5 & 6.
Row 11: p4, k1, p1, *SWYF-3, p1, k1, p1, repeat from * to last 3 sts, p3.
Row 12: k2, p2, k1, p1, *SWYF-3, p1, k1, p1, repeat from * to last 3 sts, p1, k2.
Rows 13-60: repeat Rows 5-12 6 more times.
Row 61 & 62: repeat Rows 5 & 6.
Finishing Rows
Row 63: p39.
Row 64: k39.
Row 65: p39.
Bind off all stitches loosely. (Sample uses the Basic Bind Off) Weave in ends and trim close to work.
Block well to an 8” x 8” measurement.
Afghan Notes:
If you are intending this square to be part of an afghan, you may wish to make up to 3 or 4 additional squares. We will be sharing at least 24 of these patterns for you to use in your blanket. Use the following general measurements to decide how many of each of the 8″ x 8″ squares you will need, rounding up as
necessary:
• Baby Blanket: 30″ x 36″
• Children: 42″ x 48″
• Lapghan: 36″ x 48″
• Twin Bed Afghan: 60″ x 85″
• Queen Bed Afghan: 90″ x 95″
If you have any questions or comments, please feel free to leave a note for Bethany Dailey below in the comments! :)